Filter products
CC
Cam
Cylinders
Valves
Trans
Model
Product Type
Description
Engine Code
Brands
Position
Your vehicle details
Make: Toyota
Model: Mr2
Engine: 2.0
Year: 1991
Fuel: petrol
Please note this is for guidance only
Please phone 01392 215635 for availability.
CV JOINT BOOT KIT
This First Line CV Boot Kit fits the following vehicles
- MR2 2.0 SW20 04/90-12/92
| Fitment | Bellow Kit, driveshaft |
|---|---|
| Size mm | 3SGE, 3SFE, 3S |
| Part Note | 119 |
| Note | L.: 110;Shaft Dia.: 21;Joint Dia.: 100 |
| Vehicle Detail | With grease lubrication |
| Engine Code | With Clamps |
CV JOINT BOOT KIT
£41.81
£34.84
new
In Stock
Boot Kits
This Shaftec CV Boot Kit fits the following vehicles
- MR2 2.0 SW20 04/90-12/92
| OE System | Bellow Set, drive shaft |
|---|---|
| Fitment | 3SFE, 3SGE, 3S |
| Part Detail | 119 |
| ABS No of Teeth | Part Status:Yes |
| Material Type | L.: 87;Inner Dia.1: 24;Inner Dia.2: 83 |
Boot Kits
£19.30
£16.08
new
In Stock
Boot Kits
This Shaftec CV Boot Kit fits the following vehicles
- MR2 2.0 SW20 04/90-12/92
| OE System | Bellow Set, drive shaft |
|---|---|
| Fitment | 3S, 3SGE, 3SFE |
| Part Detail | 119 |
| ABS No of Teeth | Part Status:Yes |
| Material Type | L.: 90;Inner Dia.1: 24;Inner Dia.2: 83 |
| Engine Detail | Version: Universal Cone,Fitting Boot |
Boot Kits
£20.96
£17.47
new
Shaftec CV Joint (Rear Outer)
JCV988AN
Low Stock
CV Joints
This Shaftec CV Joint fits the following vehicles
- MR2 2.0 SW20 04/90-12/92
| OE System | Joint Kit, drive shaft |
|---|---|
| Fitment | 3SFE, 3SGE, 3S |
| Part Detail | 119 |
| ABS No of Teeth | New Part;with retaining ring rear side;Part Status:Yes |
| Material Type | ABS Ring Dia.: 89;L.: 158;Dia.: 90;Seal Dia.: 56 |
| Axle Info | No. of Teeth, ABS Ring: 48;Internal Teeth, wheel side: 25;Outer gearing wheel side: 26 |
CV Joints
£103.31
£86.09
new
CV Boots & Joints & Drive Shafts
We can supply the best CV Boots & Joints & Drive Shafts for your Toyota Mr2